This is how we edited the steam train cab image of the Umgeni Steam Railway train from the before and after post.  The following screenshots show the process of editing in Camera Raw to finished photograph.

The image was taken on a very wide angle lens. We bought a Voigtlander 15mm manual lens for our Sony A7r and A7 before we left for a South African trip. Have to be honest here. I (Tim) am a wide angle lens freak. I can’t get enough of them. If I could only have one lens ever, it would be a prime super wide. Not only that, I really like manual focus.  Ally, on the other hand has a more rounded view of lenses and is happier with longer focal lengths but will still use wides.

The great thing about wide angles is the huge amount of depth of field they give so for the image below, I didn’t have to focus through the camera. I just set the lens to about 2m and everything from o.5 to infinity was in focus at f11.

I was standing outside the cab and just held my hand with camera inside and pressed the shutter.

Finished image with Raw editing

The Raw file editing

The whole image exactly as it came from the camera

The first thing to do was to crop the extra unwanted detail away in Raw for a better composition.

Post crop without any Raw editing

Post crop after global Raw editing

Once this was done I set about doing a global adjustment in Raw. Darker areas were lightened with the shadow slider and the lighter areas darkened with the highlights slider. Don’t over do it or it will look either too flat or like a bad HDR effect. All the editing in Camera Raw here can all also be done in Lightroom, Affinity Photo or any other raw file editor.

Doing the dodge and burn dance

Most of the work on this image was done with adjustment brushes. Every little white dot you see on the above screenshot is an adjustment brush. Most of the brushes affect the lightness / darkness as well as clarity (micro-contrast) and finally saturation and colour.

The image was finally taken into Photoshop for resizing and sharpening.

If you wish to learn Photoshop on the iPad or Affinity Photo on the iPad have a look at our Udemy courses below.

Click here for amazing money off deals to Learn Photoshop or Affinity Photo v2 on the ipad with his Udemy course

Remember – All the adjustments I have done are just a form of dodge and burn but affecting colour and contrast, not just dark and light. All the great photographers from Dorothea Lang to Ansel Adams used dodge and burn so you are not ‘cheating’.

Final image verses the original from camera Raw file. Drag the slider to see the difference between before (right) and after (left).

The post Editing in Camera Raw – How to appeared first on ImageExplorers.

Learn from the Masters

Some days we look at well-known photographers images and something in us just cries out “I wish I could create images like that”! At first I thought it was just me but I have discovered that the majority of photographers feel like this about certain other photographers some time. If you have ever seen the beautiful black and white zen-like work of Michael Kenna then you will probably know this feeling really well. If you don’t know Michael Kenna’s work, have a look at his web site. Once you have finished weeping with inadequacy come back and let us look at how to photograph like Michael Kenna so you too can create similar style images.

Have a look at our other  ‘How to photograph like…’ series that includes Edward Weston and Ansel Adams to see how to create images like they have.

Now before we get started there are a few things to know.

• Michael Kenna creates images on a medium format Hasselblad.
• He uses film
• He has a very zen-like nature about him
• He is a photographic genius
• He is a darkroom super-craftsman

So now the bar has been set so spectacularly high, let’s see what we can do with our DSLR or Mirrorless digital cameras – no pressure then!

I photographed these cranes at the Bristol harbour, UK in a Kenna style with simple shape and no shadow detail

Analysing the Master

When trying to imitate anybody’s style we start by analysing their techniques, so when looking at Michael Kenna’s photography, this is what I saw.

Composition:

Michael Kenna looks for simplicity in his composition, moving closer or framing the subjects to get rid of extraneous objects. He uses a lot of symmetry and rule of thirds but is not afraid to break rules if the composition calls for it. As he photographs on a Hasselblad which has a square format, a vast number of his images are square.

• Pro tip – Michael will often put the horizon on almost the centre of the image. He uses a technique called the optical centre. This is about 10% above the centre of an image and is where the eye naturally rests.

The images have a timeless quality about them, which suggests a photographer who is in no rush, and analyses every scene and possible angle before creating the image.

Black and White film:

In an interview with Procameraman.jp Michael talked about his favourite film as Kodak Tri-X 400 ISO. This is a very forgiving / flexible film and well suited to the long exposures he does. Some are as long as 10 hours. It also has a very distinctive and pronounced grain structure.  See our post on what black and white film to choose to find out more.

ND to blur clouds or water and other filters to darken skies:

In order to create the long exposures, to get the milky water during daytime we need to assume that Michael uses an Neutral Density filter and the camera on a tripod. See our how to photograph with ND filters tutorial.

We can also assume he uses a red and or polarizing filter to darken and lighten parts of the image. We have written extensively about using filters in black and white photography in other posts.

Quite a lot of contrast and high key:

Michael Kenna’s images appear to have large tracts of almost black and almost white in them. The middle tones are there but are in the minority. A lot of his images are also high-key, meaning most of the image is really light although almost every image has something nearly black in it. As a master craftsman Kenna is probably using a combination of film development chemistry and darkroom techniques to augment the original stark image. For more ideas about black and white, see our post on what makes a good black and white image.

I photographed this high key image in Wivenhoe near our home on a misty autumn morning. Not quite Kenna style as it doesn’t have any very dark areas.

How to Photograph like Michael Kenna Step-by-Step guide

Find your Perfect Composition

This is the hardest part of the process but with a little patience you will achieve extraordinary results. Don’t rush things. Leave your camera in your bag until you have found the perfect spot to create an image from. Try to pre-visualise the final image before you touch the camera.

Look around for simple details, structures or shapes. To photograph like Michael Kenna, try to ignore the colour aspect that can be overwhelming.

To help us compose we set the Sony A7R camera to black and white mode so the images appear in the viewfinder as black and white (most mirrorless cameras have a similar feature).

If we’re using Ally’s Nikon D600 DSLR or a film camera that doesn’t have this feature then we view the scene through a strong coloured filter. This gives you one colour, and even though it’s not black and white, it helps to show the shape and form of the scene.

Exposing the Scene

To photograph like Michael Kenna, use long exposures with the camera on a tripod to get movement in clouds and water. Make sure you’re using a solid tripod, as even the slightest movement on the camera during a 30-second exposure can ruin an image. Use a Neutral Density filter to help you get the very long shutter times you need. Our 10-stop filter usually allows us to achieve 30-second shutter times in normal daylight.

We use Manfrotto and Gitzo heavy duty tripods with robust heads. They are a pain to carry but so worth it when you images are stunning. We recently tried out a travel tripod from Manfrotto but it was much to wobbly in even the slightest breeze so it’s going on eBay soon. Don’t forget your red or orange or polarising filter to darken the sky. These will also help to give you longer shutter times.

Not all of Michael Kenna’s photographs are long exposures though but they are all about simplicity. Taking the essence on the scene into a beautiful composition. Michael once referred to his images as a Haiku rather than a literary work.

The Digital Darkroom

Michael is known as a darkroom master artist and artisan and so it comes as no surprise that he does a lot of dodging and burning on his images. He also mentioned in an interview with Camerawork magazine that he uses Ilford Multigrade paper so he can dodge or burn areas at a variety of contrasts.

All of this we can do in our RAW files using adjustment brushes.

Finally, a how to photograph like Michael Kenna post would not be complete without talking about toning. Michael uses sepia tone on his images to give the highlights a bit of colour. We can easily do this to our RAW files in the RAW converter or, (and we prefer this method), use a Gradient Map adjustment layer in Photoshop.

Final and original image from our Michael Kenna style photographic trip. Drag slider to see more.

Putting it all into practice with a trip to the North Norfolk coast in the United Kingdom

The Photographic Process

Ally and I live in a county called Essex, which is about an hour’s drive from central London (or 2 if the traffic’s bad). About 2 hours drive north of us, is the beautiful undeveloped coastline of Norfolk that offers plenty of scope for interesting images. After a long hot summer we set off for 2 days photography knowing that we wanted to create something simple and stark.

The first day was stunning, bright blue sky with small puffy clouds, long sandy beaches with sand dunes, photography heaven. The second day was rainy and overcast and just awful. So how did we do? Well, the first days’ images were ‘pants’. (This is an English expression meaning rubbish!)

Tim looking for the perfect composition on the rocky pier

It was the overcast sky that gave us the beautiful stark and simple images (without harsh shadows) that we were looking for. I find this very annoying as I (Tim) am a sun worshiper and hate overcast days but there we go.

Ally trying a different angle

Once I had viewed all the potential photographic vantage points for the pier I wanted to photograph, I set up the Manfrotto tripod on the rocks and made sure it was secure. I wanted to do some longer (30 sec) exposures to give the water movement so I attached our ND filter. The exposures ranged from 10 to 30 seconds and even though I had a sturdy tripod the wind still gave me a bit of camera shake on some of them.

This is what the bit of wind did to my long exposure when it buffeted the camera

When composing I used a combination of symmetry and the rule of thirds for my horizon.

Rule of Thirds

In the Digital Darkroom

I am using Adobe Photoshop Creative Cloud (2018) however this technique will be very similar in any software that enables RAW file editing including Affinity Photo, a favourite of ours on the iPad.

Cromer contact sheet in Bridge including some edits

In Raw, the un-retouched original

In Raw with very basic edit 

The first thing I did when opening the image in Raw was to convert it to Black and White. I also set the options to sRGB (not greyscale) and the channel bit depth to 16.

This gives me an image with smooth gradients that I can add colour to in Photoshop. If you open it from Raw into Photoshop in greyscale mode you will have to convert it to RGB colour to add the toning adjustment layer. Having it as 16 bit rather than the default 8 means that there are thousands of shades of lightness per channel rather than just 256. This gives you smoother gradients without as much ‘banding’.

I then took down the highlights as some of the clouds were overexposed.

Raw gradient to get the dark sky Michael Kenna style

Along the top of the camera Raw window you will see a little gradient icon. I clicked the icon to get to the gradient area and added 2 gradients to darken down the clouds a bit.

Raw dodge and burn edit like Michael does in the darkroom

Clicking the little paintbrush along the top again, takes you to the adjustment brush area. I added a brush, painted the area I wished to adjust and then adjusted the settings on the right. Not only can you lighten and darken but also change contrast, sharpening, clarity and a host of other properties. As you can see by the dots on the picture I did 13 different brushes. Some to lighten the water, some to increase contrast and detail on the rocks. The little mask button at the bottom allows you to see the areas you are painting. I switch it on and off to see what I’m doing.

Overall on the image I lightened the highlights and darkened the shadows to get that distinct Michael Kenna look.

Lastly I added a selenium tone adjustment layer

I opened the image in Photoshop as a Raw smart object. You do this by holding down the Shift key while clicking the open image (object) button in Photoshop Raw.

If you wish to learn Photoshop on the iPad or Affinity Photo on the iPad have a look at our Udemy courses below.

Click here for amazing money off deals to Learn Photoshop or Affinity Photo v2 on the ipad with Tim’s Udemy course

Having my image in Photoshop as a Raw smart object allows me to double click the smart object any time and go back into Camera Raw to make adjustments. If you’ve never converted to black and white before, check out our post with technical and geeky explanations!

I added a Gradient map and chose the Selenium tone Gradient Map. Even though Michael Kenna uses sepia tone over selenium I thought it looked better on this particular image. The difference is that a sepia tone works on the highlights first and selenium toning works on the shadows first.

Final Image

Go Forth and Create Like a Master

As you can probably tell by the tone of this post, Michael Kenna is one of my favourite photographers and although I don’t go out to copy his work, it has always had a great impact on my personal style. Anybody can copy anybody else’s technique; however you need your own personal vision to really create you own image of he world. Learn all you can from all the master photographers but then turn all that knowledge into your own unique vision. See our post on photographing like Edward Weston  and Ansel Adams.

To sum up a post of how to photograph like Michael Kenna we need 2 things. Beautiful simple composition and lots of shadows and highlights in a toned Black and White image.

Try it out. You might find that your own style, added to this technique creates some amazing images you’d never thought of doing before. Mostly, have fun doing it.

The post How to photograph like Michael Kenna – Tutorial appeared first on ImageExplorers.

The light meter in your camera is a very useful tool, but there are times when you need to know that it’s actually lying to you. So how you can overcome it? Exposure compensation to the rescue.

Firstly, let’s look at what the camera light meter sees. The light meter shows a scene as being correct when it averages to perfect grey. Great for most images but it means that if you’re trying to photograph a white polar bear in snow your camera will give you the perfect exposure reading to make the snow and bear a mid-grey. This is a perfect time for exposure compensation. By adding 1, 2 or even 3 stops of light we can make the grey go white and compensate for the camera’s incorrect exposure. Exactly the opposite for a black cat sitting on a black mat. We need to give the camera less light than it thinks it needs so that the cat will look black and not come out grey.

“But I don’t photograph polar bears and my cat is already grey”, I hear you cry!

Okay, so how about a sunset or sunrise? All that sun shining directly into the lens as well as a dark foreground, can fool the camera into giving you an exposure that results in an image which doesn’t look like you envisaged it.

Without exposure compensation (the camera’s ‘correct’ exposure), on this image of shipwreck in Cyprus, the sky looks too light

By using exposure compensation on the shipwreck in Cyprus we can make the sky more pleasing, but everything else is too dark, but we then use dodge and burn techniques to correct this. See image at end of post.

How about the photograph of your loved one standing on a beach in the shade of a palm tree? The camera looks at the scene and makes its exposure decision based on the sunny background so the small person in shade in the front is too dark but the bright sunny background is perfectly exposed.

Correct exposure doesn’t always mean a pleasing image

So how do we fix this?

Well, if you’re photographing in manual mode, you can just adjust your shutter, aperture or ISO a few stops to compensate for this. If you are photographing in an auto mode like aperture or shutter priority, or even program mode, then most cameras have an exposure compensation button.  This allows you to over or underexpose a scene to compensate for the camera’s light meter.

So far so good but sometimes you want the perfect exposure for the bright sunset so the sky looks beautiful. Not only that but you also want the dark foreground to look bright and vibrant too.

Well there are various ways you can have your cake and eat it.

Option 1 – Bracketing

This means taking 2 or 3 (or more) images of exactly the same shot with different exposures. Most cameras have a bracketing function built in, where it will take a number of shots, a number of stops over and under your original choice of exposure.

So what next? You open Photoshop and this is where the magic happens! Photoshop will allow you to merge these multiple images into an HDR file so you can have details in the dark as well as light areas.

Using 2 images of different exposures (circled in red) to create a third HDR image

Although one can do this in Photoshop, (you get there by selecting multiple images in Bridge and choosing Merge to HDR from the tools and Photoshop sub-menu), I would recommend using a different piece of software. Aurora HDR 2018 seems to give much more pleasing results than Photoshop.

Option 2 – Dodge and Burn

Use an image that shows the most detail in both areas. Lighten the darker areas with either a dodge tool in Photoshop or an adjustment brush in Raw (much better quality). Now darken the light areas with a burn brush in Photoshop or an adjustment brush in Raw. See our before and after tutorial of Queen Carolines Temple in Hyde park.

Similar image from shipwreck set –  with a bit of dodging and burning in Photoshop Raw to bring the ship and rock details to life

Option 3 – Shadows/Highlights

In Photoshop there is an adjustment setting in the adjustment menu called the Shadows/Highlights. This amazing adjustment allows you to lighten the darker areas and darken the light areas of an image. (You can achieve a similar result in Raw with the Shadow and Highlights sliders. You will also need to up the Saturation and Contrast a bit.)

Correct exposure doesn’t always mean a pleasing image – image copyright Adobe

Using the Shadows/Highlights tool as a form of Exposure Compensation

Finally, if your images show too much detail in the shadows and highlights area there are numerous ways of increasing contrast to get more “punch” but a quick trick is to use the Dehaze tool in Photoshop Raw. See a video tutorial here and our favourite Photoshop shortcuts here.

The post Why Your Camera Lies to You – Exposure Compensation appeared first on ImageExplorers.